corner post electric fence insulators
"
clou de 4mm sur la barrière électrique Insulators de petit clou du noir pp de longueur de l'isolateur 70mm
Nail On Insulator 2mm Wire Running Through 4mm Nail 70mm Length Black PP Small Nail Electric Fence Insulators Bobbin Corner Insulator (Electric Fence Insulators) Allow wire, poly wire, poly rope to be free running Wire up to 2mm 4mm nail, 70mm length Impact-resistant plastic PK:50pcs/Bag,700pcs...
Isolateur de fin de poteau INS079 15,5g Noir Isolateurs de clôture électrique pour poteau d'angle moyenne tension
Product Overview The INS079 is a lightweight PP end strain insulator for medium tension electric fences. Supplied in black HDPE or fibreglass, it is made for corner and end of fence positions and accepts wire, poly wire, poly rope and poly braid up to 6 mm. Its slim, low-mass form keeps the fence ...
Isolateur d'angle INS560B 147g Isolateurs de clôture électrique pour poteau en bois pour ruban de 40 mm Clip double face
Product Overview Built for timber post corners, the INS560B steers a broad fencing tape around the turn using two clips that keep it square. A 304 stainless fastener anchors it to the post, and the 147 g shell of HDPE and galvanized steel is made for long-term outdoor lines. The paired clips stop ...
Isolateur à vis en acier galvanisé INS037 7mm 99g Isolateurs de clôture électrique pour poteau en bois d'angle ou de bout
Product Overview The INS037 heavy 7 mm galvanized steel screw-in insulator is built for the end of the fence, where conductor tension reaches its highest point. A semicircle supporting core cradles wire, poly wire and poly rope so they run freely instead of cutting into the fitting, while the 99 g ...
Isolateur en fibre de verre à rainures profondes INS073 30g Isolateurs de clôtures électriques à déformation terminale pour tension moyenne
Product Overview The INS073 deep groove end strain insulator is supplied in black HDPE or fibreglass and is designed for medium tension electric fencing. Its generous 8 mm channel lets wire and poly products pass through freely, while the grooved shoulders hold the conductor in place. At 30 g, the ...
Insulateur de donut en porcelaine INS098 91g Glaçage blanc Isolateurs de clôture électriques pour les coins de bout de poteau 11 mm trou
Product Overview The INS098 porcelain donut insulator is a fired ceramic fitting with a smooth white glaze. An 11 mm hole through the centre takes a post or bolt, and the 40 mm diameter, 41 mm high body insulates wire at a corner or end of the fence. Porcelain resists heat, moisture and UV far ...
Isolateur pour usage moyen INS074 33g Blanc pour fil de clôture électrique de 6mm pour poteau d'angle
Product Overview The INS074 medium duty end strain insulator is a reinforced black PP fitting finished in white for visibility along the fence. It handles a wide range of fence types and accepts wire, poly wire, poly rope and poly braid up to 6 mm. Reinforced ribs add strength at the corners and ...
Insulateur à déviation à vis INS081B à bras long 230 mm raccords de clôture électriques pour fil de bois 5 mm
Product Overview The long arm multi-purpose offset insulator INS081B is designed to hold electric fence conductors well away from wooden posts and rails. With a total length of 230 mm split between a 55 mm plastic arm and a 55 mm galvanized steel screw, this fitting gives the line a clean offset gap ...
Insulateur de clôture de ferme en PP résistant aux UV blanc / noir / jaune personnalisable
Insulators Product Description: End Strain Insulator is a UV resistance insulator made in China. Its shape is like an egg, with good water repellency and ultraviolet resistance. It is widely used as farm fencing and electric fence accessories and tools. This electric fence insulator is made of high...
